DDoptics rifle scope DDMP V6 5-30x56 Long Range | MRAD | tac-A, hunters + sport shooters

Product information "DDoptics rifle scope | DDMP V6 5-30x56 | Long Range | MRAD | tac-A"

•          DDMP - DDoptics Match Precision
•          perfect for the demanding sports shooter
•          tested for long range up to 2 km
•          30 MRAD adjustment range enables extreme long shots
•          robust 34 mm tube
•          large, tactical metal turrets (not plastic)
•          double scaling (doubleturn)
•          internal zero stop for ASV (zero stop)
•          tactical 0.1 MRAD click detent (1 cm/click)
•          one revolution = 10 MRAD New reticle tacA in the 1st image plane
•          powerful parallax compensation with 25-1000-∞
•          all DDoptics rifle scopes are waterproof and filled with nitrogen
•          Accessories: 1x flip caps, cleaning cloth, DDoptics chip, targets, target optics instructions, ballistics set

Precise internal zero stop

After removing the turret caps of the reticle adjustment, the turret can be removed upwards by loosening 3 grub screws. Below you will find the Zerostop in the form of a round, black disc. The zero stop is adjusted after zeroing by loosening the (also) 3 grub screws on the zero stop disc. When loose, the disc can be turned to the stop without any effect and then fixed again with the grub screws. You can see the stop in the picture between the target and the target optics. Then the tower is put back in the zero position and locked using the 3 grub screws.

Shutdown IPoint

The automatic switch-off IPoint with intelligent control can be selected for this target optic.

From medium distance to long range

The V6 5-30x56 DDMP rifle scope, whether as a sporty rifle scope in the long range range or the medium distance between 100 m and 2000 m. The ultra-modern V6 5-30x56 DDMP rifle scope covers the entire “full spectrum” of possible applications. With a huge adjustment range of 30 MRAD (29.6) -> 100 MOA, distances of up to 2000 m and more can be achieved. The entire adjustment range is covered with just three turns, which makes it possible to change a wide variety of distances extremely quickly.

Reticle tacA

The tacA is incredibly easy to use. Due to the 1st image plane, the distance from solid line to solid line always corresponds to exactly 1 MRAD -> 10 cm at 100 m. The intermediate lines are drawn accordingly for 0.5 MRAD -> 5 cm. The arrow-shaped beams were deliberately kept transparent so that nothing remains hidden behind the reticle.

Continuously variable red dot from daylight to night vision mode

The lighting unit of the tacA is a perfectly balanced system with maximum dynamics. In the first brightness levels, only an extremely small illuminated dot can be seen. This is dimmable so that it can also be used with a night vision device. If the illuminated dot is turned up further, the entire balistic reticle lights up slightly at a certain intensity (only visible in the dark).

Technical characteristics:

•      Weight in g: 1068
•      Magnification: 5-30x
•      Diopter compensation: -2.5 to 2.5
•      Type of optics: rifle scope
•      Twilight number: 16.7-40.9
•      Generation: 3rd
•      Compensation: HDX III
•      Lens diameter lens in mm: 56
•      Exit pupil in mm: 9-2
•      Field of view at 100 m (in m): 7.04-1.05
•      Eye relief in mm: 85-97
•      Reticle: tacA
•      Luminous dot II: yes
•      Manual or automatic illumination dot
•      Reticle image plane: 1st image plane
•      Reticle adjustment / click: 0.1 MRAD
•      Reticle adjustment (scaling): double
•      Max. adjustment range: 30 MRAD
•      Parallax compensation: 20-500-infinity
•      Surface: fine black
•      Center tube diameter in mm: 34
•      ASV Zerostop: yes
•      External lens diameter in mm: 65
•      Eyepiece diameter in mm: 44
•      Total length in mm: 368