Product information "DDoptics rifle scope | Nighteagle V6 5-30x50 | Gen3 | Tactical | MOA | Duplex".
Which red dot is installed in this rifle scope?
A manual fiber optic illuminated dot is installed as standard in our V6 5-30x50 riflescope.
Rifle scope with quick adjustment & zero stop
On the vertical adjustment, a double scale allows you to read and set the number of click adjustments made. After zeroing, the reticle adjustment can be “zeroed” by releasing the turret safety with a coin or a screwdriver. The zero setting is then countered from below using the zero stop in order to reach a stop at the zero position. Starting from the zero position, different shooting distances can be preset using a marking system.
Almost indestructible rifle scope
The nitrogen filling of the Nighteagle V6 5-30x50 Tactical riflescope ensures watertightness (0.3 kg/cm²) and protects against internal fogging. Rough use has no effect on the riflescope tube (diameter: 30 mm, length: 348 mm), which is made of duralumin (70%), brass (20%) and steel (10%). The thickness of the outer wall is over 1 mm. The shock resistance is 1000 G or 6500 joules. The target optics remain fully functional even at extreme temperatures (+80 °C to at least -20 °C).
The best light point for backlight/twilight/night vision technology
The fiber optic light dot (also available in the automatic IFiber version for an additional charge) is kept so small that the target is obscured as little as possible. Thanks to the fiber optic technology, the illuminated dot of the rifle scope not only becomes darker but also finer when dimmed significantly. The light point can be dimmed continuously by 100% until it can no longer be seen by the human eye. Below level 4, the red dot can only be seen with a night vision device. If desired, the red dot can be adapted to the use of night vision device types such as Photonis commercial-grade XD4 or XR5 or Gen. 3. When the illuminated dot is switched off, the continuous reticle acts like a rifle scope without an illuminated unit and is not interrupted by an annoying, free-standing dot. When the light dot is activated, neither annoying glow nor reflections within the optics disturb. Since the lighting unit is produced by hand, special customer requests can be taken into account individually.
Horizontal adjustment with opposing scalings
The side adjustment is labeled with two opposing scales. Starting from the zero setting, the wind direction and wind strength, or any movement of the target, can be preset here.
The parallax compensation
Already from 25 m, a razor-sharp and fatigue-free image is guaranteed at all magnification settings and corrects the shooting error caused by an oblique view.
Eye relief and diopter adjustment
The eye relief is 89 mm, which also ensures the use of more powerful calibers. Only three quarters of a turn is necessary for the entire magnification range. The diopter adjustment (-3 to +3) can be easily adjusted at the rubberized end of the eyepiece using a grooved adjustment.
Technical characteristics:
Shipping only inside European Union.
Shipping: Germany € 0,- ; Europe Zone I € 8,- Europe Zone II € 20,- ; World Zone III € 25,- and World Zone IV € 30,-
The countries of shipping zones you can see at "important customers informations"
Still in stock
can be shipped within 3-7 working days +shipping 7-12 days
Product no. | Absehen | A | Status | Price | |
---|---|---|---|---|---|
Nighteagle 5-30x50 NFX Mildot | MRAD-0001 | manueller Leuchtpunkt | . |
|
1,150.00 € * |
|
Nighteagle 5-30x50 NFX Mildot | MRAD-0002 | automatischer Leuchtpunkt | . |
|
1,250.00 € * |
|